How Our Calculators Work

The formulas, multipliers, defaults, and sources behind every number the calculators give you.

Last updated

Every calculator on PetFeedCalculator.com follows the same three steps. It estimates the energy your pet burns at rest, scales that number for life stage and lifestyle, then converts the daily calorie target into cups, cans, or grams of your food. This page lists the exact values each step uses, so you can check the math yourself or take it to your veterinarian.

Step 1: Resting Energy Requirement (RER)

RER is the number of calories your pet burns in a day at rest, in a comfortable environment, just to keep its body running. The calculators use the equation published by the National Research Council in Nutrient Requirements of Dogs and Cats (2006), the standard reference in veterinary nutrition:

RER (kcal/day) = 70 × (body weight in kg)0.75

The exponent of 0.75 reflects that metabolism does not scale in a straight line with body size. A 60 lb dog weighs six times as much as a 10 lb dog but needs only about 3.8 times the resting calories. Weights entered in pounds are converted at 2.20462 lb per kg before the formula runs. The same equation is used for dogs and cats.

Step 2: Life-stage multipliers (MER)

Maintenance Energy Requirement (MER) is RER multiplied by a factor for your pet's life stage, spay/neuter status, and activity level. It is the calculator's estimate of your pet's actual daily calorie need:

MER (kcal/day) = RER × life-stage multiplier

The multipliers below are the exact values in the calculator's code. They are aligned with the NRC (2006), the WSAVA Global Nutrition Guidelines, and the 2014 AAHA Weight Management Guidelines. Published sources give ranges rather than single numbers, so each value is a midpoint chosen from within those ranges.

Dogs

Life stageSedentaryModerateVery activeWorking
Puppy (under 4 months)3.0 × RER
Junior (4 months to 1 year)2.0 × RER
Adult, intact1.41.82.54.0
Adult, spayed/neutered1.21.62.03.5
Senior (6 to 10+ years by size), intact1.31.61.82.0
Senior (6 to 10+ years by size), spayed/neutered1.11.41.61.8
Pregnant (second half of gestation)3.0 × RER
Lactating4.0 × RER (real need ranges from about 2 to 6 × RER by litter size)
Weight loss1.0 × RER at current weight (see below)

Working dogs such as sled and herding dogs can need anywhere from 3 to 8 × RER, so the 4.0 value is a starting point, not a ceiling.

Cats

Life stageSedentaryModerateVery activeWorking
Kitten (under 4 months)2.5 × RER
Junior (4 months to 1 year)2.0 × RER
Adult, intact1.41.61.82.0
Adult, spayed/neutered1.01.21.41.6
Senior (10+ years), intact1.11.41.61.8
Senior (10+ years), spayed/neutered0.81.11.31.5
Pregnant2.0 × RER
Lactating3.5 × RER (can reach 6 × RER with a large litter)
Weight loss0.8 × RER at current weight (see below)

Spayed and neutered pets get lower multipliers because neutering reduces energy need, and neutered indoor cats are among the pets most prone to weight gain. Senior multipliers sit below the matching adult values to reflect the slower metabolism and lower lean mass of older animals.

Step 3: Converting calories to portions

Once the calculator has a daily calorie target, it divides by your food's calorie density to give an amount per day, then by your chosen number of meals (two by default) to give an amount per meal.

Portion per day = MER ÷ calories per cup, can, or gram

The most accurate result comes from entering the calorie figure printed on your food's label. If you leave that field blank, the main calculator uses these typical values:

Food typeDefault used
Dry kibble350 kcal per cup
Wet food, dogs400 kcal per 13-oz can
Wet food, cats85 kcal per 3-oz can
Raw or fresh (main calculator)450 kcal per cup
Mixed dry and wetCalories split by your chosen wet share (50% by default), then each share converted using the dry and wet values above

Real foods vary widely. Dry foods commonly run from about 300 to over 500 kcal per cup, so a default can be off by a third or more for your specific food. Treat any result based on a default as a rough starting point.

Body condition score and ideal weight

If you enter a body condition score (BCS), the calculator uses the 9-point WSAVA scale, where 4 to 5 is ideal. It estimates an ideal weight by assuming each BCS point away from 4.5 represents about 10% of body weight:

Ideal weight ≈ current weight × (1 − (BCS − 4.5) × 0.10), shown as a ±5% range

A BCS of 1 to 3 is labelled underweight, 4 to 5 ideal, 6 slightly overweight, and 7 to 9 overweight. The 10%-per-point figure is a widely used rule of thumb, not a precise measurement, and it is less reliable at the extremes of the scale. If you are not sure how to score your pet, the body condition guide walks through it.

Worked examples

A 50 lb neutered adult dog, moderately active

  1. Weight: 50 lb ÷ 2.20462 = 22.68 kg
  2. RER: 70 × 22.680.75 = 727 kcal/day
  3. MER: 727 × 1.6 = 1,164 kcal/day
  4. Portion: 1,164 ÷ 350 kcal per cup = 3.33 cups/day, or about 1.66 cups per meal over two meals

A 10 lb neutered indoor cat, moderately active

  1. Weight: 10 lb ÷ 2.20462 = 4.54 kg
  2. RER: 70 × 4.540.75 = 218 kcal/day
  3. MER: 218 × 1.2 = 261 kcal/day
  4. Portion: 261 ÷ 85 kcal per 3-oz can = about 3 cans/day

How weight loss is handled

When you choose the Weight Loss Program life stage, the calculator applies 1.0 × RER for dogs and 0.8 × RER for cats, calculated at your pet's current weight. This is a moderate, conservative starting point that reduces calories without a sharp cut.

Your vet may calculate it differently. Many veterinary weight-loss plans, including approaches described in the AAHA guidelines, apply the reduced factor to the pet's target weight instead. That gives a lower calorie number and faster loss. For a 60 lb dog with a BCS of 7, the estimated ideal weight is about 45 lb. At 1.0 × RER, the current-weight method gives 834 kcal/day and the target-weight method gives 672 kcal/day, about 19% less. Weight loss in pets should be supervised by a veterinarian, who can set the target and adjust it at regular weigh-ins.

Specialty calculators

Each specialty calculator uses the same RER equation and, where it applies, the same multiplier table as the main calculator. What changes is how the inputs are collected and how calories are converted to portions.

Kitten Feeding Schedule

The kitten calculator takes age as well as weight and assigns a growth stage. Kittens from 6 weeks to 4 months get 2.5 × RER over 3 to 4 meals. From 4 to 6 months they get 2.0 × RER over 3 meals, and from 6 to 12 months 2.0 × RER over 2 to 3 meals. Kittens under 6 weeks are referred to a veterinarian, because they are usually still nursing or on milk replacer. Meal counts are cross-referenced against the Cornell Feline Health Center's feeding guidance.

Large-Breed Puppy Feeding Calculator

The large-breed puppy calculator asks for the puppy's expected adult weight. Dogs expected to reach 50 lb or more follow a large-breed growth timeline, and 90 lb or more is flagged as giant breed. Puppies from 8 weeks to 4 months get 3.0 × RER, 4 to 12 months 2.0 × RER, and large breeds from 12 to 18 months 1.8 × RER while their skeletons finish growing. Smaller dogs move to adult maintenance at 12 months.

Senior Dog Portion Calculator

The senior dog calculator uses the senior multipliers from the dog table above. It first checks whether your dog has reached senior age for its size, based on AAHA's definition of the last quarter of expected lifespan. Small dogs under 20 lb become senior at about 10 years, medium dogs (20 to 50 lb) at 9, large dogs (50 to 90 lb) at 7, and giant dogs over 90 lb at 6. This check stops the lower senior multiplier from underfeeding a dog that is not yet senior. Its kibble default is 380 kcal per cup over 2 meals.

Wet Food Calculator for Cats

The wet food calculator for cats uses the cat multiplier table and portions by the can rather than the cup. Preset can values are market averages: 80 kcal for a 2.5-oz can, 85 kcal for 3 oz, 165 kcal for 5.5 oz, and 390 kcal for 13 oz. You can enter your can's exact value instead, and you can split calories between wet and dry food, with dry defaulting to 350 kcal per cup.

Raw Feeding Ratio Calculator

The raw feeding calculator uses the dog multiplier table, then converts calories to grams at a default density of 1.5 kcal per gram, typical of a raw meat, bone, and organ blend. It splits the total using the common 80/10/10 starting ratio (muscle meat, edible bone, organ), with the organ share divided evenly between liver and other secreting organs. You can adjust the ratio. A ratio alone does not make a raw diet complete and balanced, which is why the calculator recommends working with a veterinary nutritionist.

Fresh Food Calculator

The fresh food calculator uses the dog multiplier table and converts calories to grams using kcal per 100 g, the unit fresh and home-cooked food labels use. If you leave it blank, it assumes 160 kcal per 100 g. Fresh foods typically range from 120 to 200 kcal per 100 g, so checking your label matters more here than with most foods.

What the formula cannot account for

The RER/MER method is the starting point veterinarians use, but it is still a population average. Two pets of the same weight, age, and lifestyle can differ noticeably in how many calories they burn. The calculators do not account for:

Use the result as a starting amount, then weigh your pet every 2 to 4 weeks and adjust portions by about 10% if weight or body condition drifts. Consult your veterinarian before major diet changes, and always for puppies, kittens, pregnant or nursing animals, seniors, and pets with health conditions.

Sources

Corrections and updates

The calculators make no adjustments for any brand, and no pet food company pays to influence the results. When a multiplier, default, or formula changes, this page is updated at the same time and the date at the top changes with it. If you think a value here is wrong or out of date, contact us with your source and it will be reviewed. You can read more about who runs the site on the About page.

Some guides on this site contain affiliate links, which earn a commission on purchases at no extra cost to you. Those links never affect calculator results, multipliers, or defaults.

Update history

PetFeedCalculator.com provides general nutrition estimates for educational purposes. Results are not a substitute for advice from a licensed veterinarian or a board-certified veterinary nutritionist.

Put the Formula to Work

Free, no sign-up required. Results in under 60 seconds.

🐾 Try the Calculator